1. 可選擇適合自己操作的速度約200至1000之間轉速最適當。
2. 可以不來水使用,及來水使用,不來水時速度可比來水
放慢一些,水量可控制大小,水量開的適量就好。
3. 磨刀從80番再來用400番再來就是1000番或更細的
3000番號磨石。
4. 我們特殊設計的更換砂紙式磨石,80番磨來使用它
被磨產品的表面就會平整光滑光亮。
5. 磨的產品特長時就像圖把側面的活動板拆下。
6. 本機有設計順時鐘方向和反時鐘方向,一般用番反
時鐘方向比較多。
7. 水源是一般水就可以,加水滿到小水箱滿為止,
當水很髒時就要換掉,盡量保持清淨水源使用。
8. 當磨石比較滑時。就用石虎清除磨石表面的鐵屜。
|
1 you can choose their own operating speed of around
200 to 1000 rpm The most appropriate.
2 you can be used without runoff, and runoff use,
not when the speed of runoff Slower
than some of runoff,
water can control the size, amount
of open water on Good.
3 Brothers come back with 400 from 80 Fan Fan Fan again
is
1000 or finer 3000 designation millstone.
4, we specially designed replacement sandpaper-type
millstone, grinding
fan to use it 80 Grinding
the surface of the
product will be smooth and bright.
5 specialty mill products like figure to the side
when
the activities of the board removed.
6 design of the machine has a clockwise direction
and counter-clockwise, usually
with anti-fan More clock direction.
7 is a general source of water can, at least to a small
water
tank is full, When the water is necessary
to replace when
dirty, try to keep clean water use.
8 When the millstone more slippery when. In addition
to
the grindstone with Dan Huqing
surface iron drawer.
|